BLTXL - HYVAC PUMP OIL (CATALOG #93050)
- MSDS: BLTXL
- Manufacturer: BOEKEL INDUSTRIES INC
- Product Name: HYVAC PUMP OIL (CATALOG #93050)
- National Stock Number: 9150-00-273-8663
Product Identification
Product ID:HYVAC PUMP OIL (CATALOG #93050)
MSDS Date:10/06/1987
FSC:9150
NIIN:00-273-8663
MSDS Number: BLTXL
Responsible Party
PHILADELPHIA, PA 19106-1002
US
Emergency Phone: 212-883-4411 OR 800-424-9300
Info Phone: 215-627-1611
Cage: 07836
Contractor
Telephone: 800-621-4778
Cage: 11273
Ingredients
REFINED MINERAL OIL
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS IN EXCESS OF 30 ML/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALE-NONE EXPECTED TO 25 MG OIL MIST
PER CUBIC METER OF AIR. SKIN-PRACTICALLY NON-TOXIC BY SKIN
ABSORPTION. ETE-MILD IRRITATION. INGEST-PRACTICALLY NON-TOXIC.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN-NO SKIN EFFECTS EXPECTRD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER. WASH
CLOTHING BEFORE REUSE. INHALATION: NONE NORMALLY REQUIRED.
INGESTION: GIVE LIQUIDS AND INDUCE VOMITING. CALL A PHYSICIAN. DO
NOT GIVE LIQUI DS OR INDUCE VOMITING IF VICTIM IS UNCONSCIOUS.
SMALL AMOUNTS THAT MAY ACCIDENTALLY ENTER THE MOUTH SHOULD BE
RINSED OUT UNTIL NO TASTE OF PRODUCT REMAINS.
Fire Fighting
Flash Point Method:COC
Flash Point:500F,260C
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTING MUST USE SELF CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:CLEAN UP USING AN OIL ABSORBENT.
Handling
Handling and Storage Precautions:STORE PER NFPA CLASS III B.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:VENTILATE AS NEEDED TO MAINTAIN COMPLIANCE WITH
WORKPLACE ENVIRONMENTAL EXPOSURE LIMITS.
Ventilation:USE MECHANICAL(GENERAL) EXHAUST AS NEEDED TO MAINTAIN
COMPLIANCE WITH WORKPLACE ENVIRONMENTAL EXPOSURE LIMITS.
Protective Gloves:NO UNUSUAL PRECAUTIONS.
Eye Protection:NO UNUSUAL PRECAUTIONS.
Other Protective Equipment:IF CONTACT IS UNAVOIDABLE, WEAR APPROPIATE
OIL IMPERVIOUS CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
NOT BREATHE VAPORS OR MIST. DO NOT INGEST. READ PRECAUTIONS ON
LABEL BEFORE USE.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:600F,316C
Vapor Pres:<0.1
Spec Gravity:0.874
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ASTM 1.0 LIQUID, MILD.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:CARBON MONOXIDE AND ASPHYXIANTS.
Disposal
Waste Disposal Methods:FEDERAL, STATE AND LOCAL REGULATIONS COVER
DISPOSAL OF CHEMICAL WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.